I need to replace a bad disk in a zpool on FreeNAS.
zpool status shows
gptid/5fe33556-3ff2-11e2-9437-f46d049aaeca UNAVAIL 0 0 0 cannot openHow do I find the serial # of that disk?
More:
glabel status gives:
Name Status Components ufs/FreeNASs3 N/A da0s3 ufs/FreeNASs4 N/A da0s4 ufsid/4fa405ab96518680 N/A da0s1a ufs/FreeNASs1a N/A da0s1a ufs/FreeNASs2a N/A da0s2agptid/5f3c0517-3ff2-11e2-9437-f46d049aaeca N/A ada1p2gptid/60570005-3ff2-11e2-9437-f46d049aaeca N/A ada3p2gptid/60ebeaa5-3ff2-11e2-9437-f46d049aaeca N/A ada4p2gptid/a767b8ef-1c95-11e2-af4c-f46d049aaeca N/A ada6p2gptid/61925b86-3ff2-11e2-9437-f46d049aaeca N/A ada9p2gptid/4599731b-8f15-11e1-a14c-f46d049aaeca N/A ada10p2I don't see gptid/5fe33556 in there.
And camcontrol devlist gives:
<Hitachi HDS723030BLE640 MX6OAAB0> at scbus0 target 0 lun 0 (pass0,ada0)<ST3000VX000-9YW166 CV13> at scbus4 target 0 lun 0 (pass1,ada1)<ST3000VX000-9YW166 CV13> at scbus6 target 0 lun 0 (pass3,ada3)<Hitachi HDS723030BLE640 MX6OAAB0> at scbus7 target 0 lun 0 (pass4,ada4)<ST3000DM001-9YN166 CC4C> at scbus8 target 0 lun 0 (pass5,ada5)<WDC WD30EZRX-00MMMB0 80.00A80> at scbus8 target 1 lun 0 (pass6,ada6)<WDC WD30EZRX-00MMMB0 80.00A80> at scbus9 target 0 lun 0 (pass7,ada7)<ST3000DM001-9YN166 CC4C> at scbus9 target 1 lun 0 (pass8,ada8)<Hitachi HDS723030BLE640 MX6OAAB0> at scbus10 target 0 lun 0 (pass9,ada9)<Hitachi HDS5C3030ALA630 MEAOA580> at scbus11 target 0 lun 0 (pass10,ada10)< USB Flash Memory 1.00> at scbus12 target 0 lun 0 (pass11,da0)Does that mean that ada2 is the bad disk?
UPDATE:
OK, I'm pretty sure that ada2 is the bad disk. And I have my notes, so I know which disk that is.
But it appears that I left a spare in there - ada0 - last time I was in the box.Can I replace ada2 with ada0 remotely? Until someone gets to the office?